Australian Teltec Pty Ltd Bisci
 
Contact Us
1800 501 314


Follow on Facebook Follow on Twitter
 
 

Tempo PTS 100/200

Home COPPER AND ETHERNET TEST SETS Pair Tracers – F Sets Tempo PTS 100/200
Tempo PTS 100/200
 

 

The PTS Pair Tracing System comprises the PTS 200 Tone Generator and the PTS 100 Probe in a woven polyester carrying pouch. The System is designed to provide an easy to use and cost effective means of tracing wire pairs.
 
PTS 200 Tone Generator
The PTS 200 may be connected via the modular plug or the crocodile clips to the pair under test. Depending on the switch position the Tone Generator will test Polarity continuity or short circuits. The PTS 200 can be used on twisted pair wiring (Telecom, Datacom, security / alarm, audio and electrical), single conductors, coaxial cables, de-energized AC wiring and just about any other wiring you can think of.
 
PTS 100 Probe
The PTS 100 Probe has a built-in loudspeaker to make it easy to hear the tracing signals and a near/far sensitivity adjustment to allow both broad searches and pinpoint identification of wires. To operate just press the button on the top and adjust the sensitivity control to hear the tone generated by the PTS 200.

 

 
 
Related Links
 PTS100/200 Operating Instructions
 PTS100/200 Datasheet
 

 
Australian Teltec Pty LtdAbout Us | New Products | Special Offers | Contact Us | Site Map Follow Us:Follow us on Facebook Follow us on Twitter
Copyright © 2009-2014 Australian Teltec Pty Ltd. All Rights Reserved