Australian Teltec Pty Ltd Bisci
 
Contact Us
1800 501 314


Follow on Facebook Follow on Twitter
 
 

OLS4 - Dual LED & Laser Sources with WaveID

Home FIBRE TEST & CLEANING Optical Light Sources OLS4 - Dual LED & Laser Sources with WaveID
OLS4 - Dual LED & Laser Sources with WaveID
 

Features:

  • Hand-held, rugged, lightweight
  • Integrated LED and Laser light source
  • 2 kHz Tone for use in Fibre tracing / locating
  • 50µm and 62.5µm mandrels included 

Applications:

  • Certify multimode and single-mode links per TIA/EIA standards
  • Certify Multimode fibre links for Gigabit Ethernet (GBE
  • Test Ethernet, Token Ring, and FDDI fibre networks
  • Fibre identification prior to splicing (with OFI-200D) 

NOYES OLS4 from AFL is a hand-held, rugged, integrated two-port LED and LASER light source designed for performing insertion loss measurements on multimode or single-mode fibre optic links when used with an optical power meter. The LED and LASER outputs are stabilized to ensure accurate test results per current TIA/EIA requirements.

Equipped with industry standard 2 khz test tone, the OLS4 from AFL is an ideal tool to pair with an optical fibre identifier (OFI-200D) for use in fibre identification.
 

OLS4 Output Ports:

  • Multimode output port; 850/1300 nm LED output at CW, WaveID, or dual wavelength WaveID
  • Single-mode output port; 1310/1550 nm LASER output at CW, WaveID, dual wavelength WaveID, or 2 kHz Tone

Faster Test Times with WaveID – In WaveID mode, the NOYES OLS4 encodes each wavelength with a unique WaveID code. When used with a NOYES power meter, the pair can send and receive two wavelengths each test – doubling testing efficiency – reducing test time! 

Flexible Output Connector Adapter Design

The OLS4 output ports are equipped with UCI based removable adapters to allow the output connectors to be inspected and cleaned, while allowing field change of output style between FC, SC, ST, and LC connector adapters. 

50 and 62.5 µm fibre mandrels Included

Mandrels condition test cable for use in certifying both 50 and 62.5 µm fibre links for current and planned high bit rate applications including Gigabit Ethernet and 10 Gigabit Ethernet. Mandrels apply to launch jumpers is seconds without tools and ensure loss measurements comply with TIA/EIA-568-B standard. 

The OLS4 is fully N.I.S.T. traceable. 

Key Specifications

  • MM Optical Port Wavelengths: 850 and 1300 nm
  • MM Output Power: > -20 dBm, 62.5 µm multimode
  • SM Optical Port Wavelengths: 1310 and 1550 nm
  • SM Output Power: 0 dBm, 9 µm single-mode
  • Output connector: FC, SC, ST, LC switchable (One style supplied with unit, order others separately)
  • Battery: 2 x AA Alkaline, optional AC adapter 

Ordering Information

Model Number: OLS4 

Accessories and Connector Adapters

 

Model

Description

2900-50-0002MR

FC adapter

2900-50-0003MR

SC adapter

2900-50-0004MR

ST adapter

2900-50-0006MR

LC adapter

8800-00-0072PR

Universal flip-top dust cap for UCI outputs

4050-00-0119PR

100-240 VAC to 9 VDC

 

 

 
 
Related Links
 OLS4 Datasheet
 

 
Australian Teltec Pty LtdAbout Us | New Products | Special Offers | Contact Us | Site Map Follow Us:Follow us on Facebook Follow us on Twitter
Copyright © 2009-2014 Australian Teltec Pty Ltd. All Rights Reserved