Australian Teltec Pty Ltd Bisci
 
Contact Us
1800 501 314


Follow on Facebook Follow on Twitter
 
 

CKSM-2 Optical Loss Test Kit

Home FIBRE TEST & CLEANING Optical Loss Test Kits CKSM-2 Optical Loss Test Kit
CKSM-2 Optical Loss Test Kit
 

CKSM-2 Contractor Series Multimode and Single-mode Test Kit with Set Reference

Combining the CSM1-2 optical power meter, CSS1-MM Dual LED light source, and CSS1-SM Dual LASER source, the CKSM-2 is a cost-effective test kit designed for performing insertion loss measurements on multimode as well as single-mode fiber optic links.

The CSS1-MM and CSS1-SM sources feature Dual output, 850 /1300 nm LED or 1310/ 1550 nm LASER respectively, from a single output port. Both CSS1 models offer 2 modes of operation, continuous wave (CW) and user selectable modulated Tone. The CSS1-MM LED and CSS1-SM LASER output ports are stabilized to ensure accurate test results per current TIA/EIA requirements. An easy to read LCD display with Backlight shows emitted wavelengths [nm], tone frequency [Hz], and Low battery condition. The CSS1-MM model output port is equipped with a fixed SC connector while the CSS1-SM output port is equipped with Universal Connector Interface (UCI) base and SC adapter.

The CSM1-2 optical power meter operates at 850/ 1300/ 1310/ 1550 nm and features multiple test Tone detection for fiber identification. The CSM1-2 stores optical references for each calibrated wavelength. An easy to read LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone frequency [Hz], and Low battery condition. The CSM1 optical input port accepts Noyes thread-on style adapter caps. One adapter cap, 2.5 mm Universal, is included. A variety of Noyes thread-on style adapter caps (FC, SC, LS, etc.) may be ordered separately.

Weighing only 0.4 lb each, units are compact and convenient for field use. The CSS1-MM Dual LED light source, CSS1-SM Dual LASER source, and CSM1-2 optical power meter are fully N.I.S.T. traceable.

 

Palm-sized, rugged, lightweight
Certify multimode fiber links per TIA/EIA standards
CW and modulated Tone
270, 330, 1000, and 2000 Hz supported Tone
Power measurements in dBm or μW; insertion loss in dB
Reference power level storage
Large LCD with Backlight
AA alkaline, optional NiMH or NiCd
Automatic power-off function
Battery Gauge
Free 50 µm and 62.5 µm mandrels
Cost-effective, easy to use
N.I.S.T. traceable
 
 
Related Links
 CKSM-2 User Guide
 CKSM-2 Datasheet
 

 
Australian Teltec Pty LtdAbout Us | New Products | Special Offers | Contact Us | Site Map Follow Us:Follow us on Facebook Follow us on Twitter
Copyright © 2009-2014 Australian Teltec Pty Ltd. All Rights Reserved