Australian Teltec Pty Ltd Bisci
 
Contact Us
1800 501 314


Follow on Facebook Follow on Twitter
 
 

SMLP4-4 SM/MM Test Kit with Wave ID and Set Reference

Home FIBRE TEST & CLEANING Optical Loss Test Kits SMLP4-4 SM/MM Test Kit with Wave ID and Set Reference
SMLP4-4 SM/MM Test Kit with Wave ID and Set Reference
SMLP4-4 SM/MM Test Kit with Wave ID and Set Reference

 

The NOYES SMLP4-4 from AFL is a rugged loss test kit for testing and certifying fibere networks to industry standards.  Backlight display works well in darker environments or direct sunlight.  Interchangeable connector adapters provide access to common network interfaces and provide access for cleaning launch and receive ports.
   
OLS4 Quad Source is an integrated two-port LED (850 and 1300 nm) and LASER (1310 and 1550 nm) light source designed for performing insertion loss measurements on multimode or single-mode fibre optic links. Each port can transmit highly stabilized output (single or dual wavelength) ensuring accurate test results per current TIA/EIA requirements. Equipped with industry standard 2 kHz test tone, the OLS4 from AFL is an ideal tool to pair with an optical fibre identifier (OFI-200D) for use in fibre identification.

OPM4-2D Optical Power Meter provides accurate measurements, reference storage for each calibrated wavelength, offers multiple test tone detection for fibre identification.   Set-Ref feature allows the OPM4 to display measured power levels above a known measured level.
  
Automatic wavelength identification significantly increases efficiency
The standard Wave ID feature automatically detects and sets the receive wavelength(s), preventing setup and measurement errors (when used with NOYES OLS series light sources). It significantly increases efficiency and reduces technician errors—and saves testing time—by eliminating the need to test each wavelength individually.
 
Optical references storage
The OPM4 stores optical references for each calibrated wavelength and offers multiple test tone detection for fibre identification.

Included 50 and 62.5 µm fibre mandrels for certifying both 50 and 62.5 µm fibre links for current and planned high bit rate applications including Gigabit Ethernet and 10 Gigabit Ethernet.  Mandrels apply to launch jumpers is seconds without tools and ensure loss measurements comply with TIA/EIA-568-B standard.

Key Specifications

OLS4 Quad Source

  • SM Wavelengths: 1310 and 1550 nm
  • SM Output Power 0 dBm
  • MM Wavelengths: 850 and 1300 nm
  • MM Output Power -20 dBm
  • Test Tones: 270 Hz, 330 Hz, 1 kHz, 2 kHz
OPM4-2D Optical Power Meter
  • Detector: Germanium
  • Calibrated Wavelengths: 850, 1300, 1310, 1490, 1550 nm
  • Measurement Units: dB, dBm, μW
  • Power: 2 x AA batteries
  • Battery Life: 300 hours
OLS4 accepts NOYES test port connector adapters allowing connection of industry standard connectors.

OPM4-2D accepts NOYES OPM test port connector adapters allowing connection of industry standard connectors.

 

 
 
Related Links
 SMLP4-4 Quick Reference Guide
 SMLP4-4 User Guide
 SMLP4-4 Datasheet
 

 
Australian Teltec Pty LtdAbout Us | New Products | Special Offers | Contact Us | Site Map Follow Us:Follow us on Facebook Follow us on Twitter
Copyright © 2009-2014 Australian Teltec Pty Ltd. All Rights Reserved